Quick answer (November 2026)
Holiday lighting is the off-season business most outdoor trades are already equipped for. If you run a roofing, pressure washing, landscaping, gutter, or window cleaning company, you already have the ladders, trucks, insurance, and crews who are comfortable working at height. Lighting fills the slow months from October through January.
- Timeline: prep in September, installs from mid-October, peak demand in November, service calls in December, takedowns in January.
- Model: most professional installers lease the lights and include install, service, takedown, and storage in one fee.
- Biggest risks: falls, insurance gaps for roof work, electrical overloads, and running out of inventory mid-season.
On this page
- Who should add holiday lighting
- The season, month by month
- Lease vs sell: the two business models
- What you need before your first install
- Safety: the part that ends seasons
- Power, outlets, and when you need an electrician
- Seasonal crews: hiring without the 1099 trap
- Running install season
- “Half my lights are out”: service calls
- Takedown, storage, and next year
- FAQ
Every November, homeowners climb onto their roofs with a box of tangled lights, and every November a lot of them end up in the emergency room. The CPSC reported about 14,900 hospitalizations for Christmas decoration injuries during the 2023 holiday season, and falls account for at least half of decorating injuries, according to local coverage of the agency’s data.
That’s the business. People will pay someone else to get on the roof. And if you already run an outdoor trade, you’re most of the way to being that someone.
Who should add holiday lighting
Holiday lighting fits trades that slow down in late fall and already work outside at height:
- Roofers: comfortable on roofs, already have the ladders and fall protection, and know which roofs are dangerous.
- Pressure washers and window cleaners: exterior work slows in November; the customer list is the same homeowners.
- Landscapers and lawn care: mowing ends just as lighting season begins. Trees and shrubs are already your specialty.
- Gutter cleaners: you’re literally already on the roofline in the fall.
- Handymen: a natural add-on for existing residential customers.
The biggest advantage is that your existing customers already trust you on their property. Your first lighting customers are usually people you’ve already served.
The season, month by month
| When | What happens |
|---|---|
| September | Order inventory, train crews, contact last year’s customers, start selling. |
| Mid-October | Installs begin. Early installs free up November capacity. |
| November | Peak demand. Every customer wants lights up before Thanksgiving. |
| December | Service calls for outages, storm damage, and timers. Late add-ons. |
| January | Takedowns, labeling, and storage. Rebook next season while you’re there. |
If you’re reading this in mid-November, you can still start this season. Focus on existing customers and simple roofline jobs, and build a waitlist for next year.
Lease vs sell: the two business models
Professional installers generally run one of two models:
- Lease: you own the lights. The customer pays one fee each season that covers installation, service calls, takedown, and storage. Once the lights are paid off, future seasons are mostly labor, which is why many established installers prefer this model.
- Sell and service: the customer buys the lights in year one and pays for labor each season after. Less inventory risk for you, but less repeat value.
The lease model also locks in next year. If you hold the customer’s custom-fit lights in your warehouse, they’re far more likely to call you back than start over.
What you need before your first install
Insurance requirements vary by state. See contractor insurance requirements by state and roofing insurance requirements.
Safety: the part that ends seasons
One fall can end your season and your business. Holiday lighting is roof work in cold weather, often in the dark, sometimes on wet or frosty shingles.
- Fall protection: OSHA’s construction standard generally requires fall protection at 6 feet. Fall protection is also OSHA’s most-cited violation year after year. See OSHA’s top 10 violations.
- Ladder setup: stable footing, the right angle, and extension above the roofline.
- Weather calls: wet, icy, or windy roofs mean you reschedule. Make that rule before the season, not on the roof.
- Daylight: testing lights at dusk is fine; climbing in the dark is not.
- Two-person rule for steep roofs and tall ladders.
If a tech does get hurt, here’s what happens next: what happens when a tech gets hurt on the job.
Power, outlets, and when you need an electrician
- Know the load. Big displays can trip breakers. Plan how many strands go on each circuit.
- Use GFCI-protected outdoor outlets and weather-rated cords and connections.
- Adding outlets or circuits is electrical work. In most places that means a licensed electrician. Partner with one rather than doing it yourself. See electrician license requirements by state.
- Timers and smart plugs cut service calls. Set them before you leave and show the customer how they work.
Seasonal crews: hiring without the 1099 trap
Lighting season needs extra hands for a few months. It’s tempting to pay everyone as 1099 contractors, but if you set their hours, supply the lights and ladders, and tell them how to do the job, they likely count as employees. That’s a costly mistake to discover in an audit. Read the 1099 helper trap and the 1099 contractor tax guide before you hire.
Running install season
November is a sprint: dozens of installs, every customer wants theirs done this week, and the weather keeps changing the plan. What keeps it under control:
- Prep in the shop. Pre-clip and pre-measure roofline runs before the truck rolls. Less time on the roof, more installs per day.
- Route by area. Group installs by neighborhood so crews aren’t crossing town between jobs.
- Match crews to jobs. Steep roofs and commercial buildings with lifts go to your most experienced crews.
- Photo every finished install. Those photos become next year’s install guide and your proof if a customer says something’s missing.
- Keep rain days visible. When weather cancels a day, the whole week has to reshuffle.
This is where most new lighting businesses outgrow the group text. VortechPro lets you schedule installs ahead for any day and time, tag crews for steep roofs or commercial lifts so those jobs only go to them, and keep photos and GPS on every job. Pricing is $99/mo for 5 techs, +$20 each, and if you already use it for your main trade, lighting is just another job type on the same board.
Adding holiday lighting to your trade?
VortechPro is $99/mo for 5 techs, +$20 each. Schedule installs ahead, dispatch same-day service calls, and keep photos on every job. 30-day free trial, no contract.
“Half my lights are out”: service calls
Service calls are part of the deal, especially on the lease model where they’re included. They usually come from a tripped GFCI, a bad bulb or connector, a timer reset, wind or storm damage, or a squirrel. Handle them fast:
- Troubleshoot by phone first. Have the customer check the GFCI and timer. Half of calls end there.
- Send the closest crew for the rest. A 20-minute fix shouldn’t cost an hour of driving.
- Carry spares on every truck: bulbs, connectors, clips, a timer.
- Photo the fix and close the job.
Takedown, storage, and next year
Takedown is where next season gets won or lost:
- Label everything. Tag each strand by run and color, matched to a diagram or photo, so any crew can reinstall it next year.
- One tote per customer, clearly labeled, stored dry.
- Test and replace bad bulbs and connectors before storage, not next October.
- Rebook on the spot. The best time to sign next season is while you’re taking this season down.
- Schedule takedowns ahead. Most customers want lights down in the first weeks of January; book them in December.
